Kynar 500® or Hylar 5000® pre-finished galvanized steel and aluminum for roofing, curtainwall and storefront applications. Installation: PAC-CLAD® can be cut, formed, nailed, screwed, or riveted using hand or power rools. Fabricate and install in accordance with drawings and normal sheet metal practices using hand or power tools. Keep cutting edges sharp, clean, and properly aligned. Exercise care during fabrication and installation to avoid damage. Maintenance: Maintenance is not required. This finish is a member of the Teflon® family, and is self-cleaning. If cleaning is desired, it can be washed with a mild soap and water followed by a clean-water rinse. Samples: These color reproductions are as accurate as modern printing technology will permit. Free material samples are available on request. Textures: PAC-CLAD® is available with a smooth texture or a standard E-5 stucco embossed pattern, available at extra cost. *Low Glass/Low Sheen: This finish is a full Kynar 500®/Hylar 5000® finish, but is formulated in a low gloss/low sheen in order to minimize the appearance of oil-canning. "This Could Be the Start of Something Big" 3107 2nd Avenue South • Birmingham, AL 35233 205.320.7663 Welcome  |  Pac-Clad  |  Location Our Product Lines  |  Free Roof Inspection Calendar of Events  |  What's New  |  Guest Book Website Design and Internet Advertising Powered By Intelligent Media Ventures, LLC Copyright © 2006 Intelligent Media Ventures, LLC All Rights Reserved..